Call (954) 228-1804Request RFP
water-header.jpg
products/plaforization/toran32.jpg

Toran 3™

What is Toran 3?

Process for cleaning, degreasing and organic passivation, based on high boiling point organic fluids.

Treatment time: 60-120", by spray or dip

Drip-off: minimum 5 minutes

Drying: 8-10 minutes at 130-140°C

Advantages of Toran 3

In addition to the features discussed for Plaforization products, Toran has the following advantages:

  1. It gives results in salt spray tests that are superior to iron phosphate, similar to those achievable by a phosphate and a passivation or a zinc phosphating process: up to 1,800/2,000 hours (ASTM B117) with TGIC polyester powders, over 1,000 hours on aluminum
  2. Applicable by spray or dip
  3. Extremely low emissions of VOC
  4. Ensures excellent topcoat adhesion, particularly on non ferrous metals
  5. For production higher than 25,000 sq.ft. per day, a scrubber can be used to recover and reuse the solvents from the system
  6. Non-dangerous classification under European and US laws
  7. Flash point higher than 212°F

The TORAN process is recommended for powder or liquid coatings that require a curing process at more than 250°F and that lasts at least 15 minutes.

Installations:

Select a process below:

Plaforization and Toran In-Line Flowcoat Plants
Plaforization and Toran Batch Flowcoat Plants
Plaforization and Toran In-Line Dip Plants
Plaforization and Toran Batch Dip Plants

About Chemtec

Chemical Solutions for Metal Finishing

We’re not the new atom on the block, we’ve been around and have the experience to prove it. Chemtec should be your first choice when looking for metal finishing related chemicals. Wether your looking for plaforization, pre-treatment, paint strippers, or waste water treatment - Chemtec has you covered.

News & Updates